webshop logo 2 header

Muzzle brake F1 pro m18*1

Muzzle brake F1 pro m18*1
Muzzle brake F1 pro m18*1
Muzzle brake F1 pro m18*1
Muzzle brake F1 pro m18*1
124.00
InStock
Levertijd: 3 a 4 dagen
Voorraad: 1.00
Kleur
Kaliber

The F1 PRO muzzle brake is a highly effective professional five-chamber brake with an exhaust channel that prevents the weapon from bouncing sideways. Its chambers are designed to not only extremely dampen the recoil and lateral rebound of the weapon, but also prevent its vertical rebound.

Test shooters described its effect: "It's like pulling a shotgun to the ground at the moment of a shot, no rebound! You can shoot again immediately, the rifle doesn't even move. The best brake I've ever seen."

Of the technical parameters, it is definitely worth mentioning the easy installation and locking of the brake using a locking nut, the possibility of using a lent (heat shield) and a surface for easy placement of the spirit level during installation. The F1 PRO muzzle brake is manufactured for M18x1 or 5/8-24UNF threads and its surface treatment is solved with cerakote paint, which withstands even the highest temperatures.

The set contains all the necessary components and its assembly can be done by an average skilled handyman. If you do not dare to assemble it, entrust it to your rifleman.

What is a muzzle brake?
The muzzle brake is a device that eliminates the negative effects of forces acting on the shooter and the weapon after the shot. It changes the flow direction of the gases escaping from the barrel, thus compensating for the recoil and dampening the impact of the shot. Our F1 PRO muzzle brake not only compensates for recoil and shot, but also prevents the weapon from bouncing sideways and vertically after a shot.

The key advantages of the F1 PRO muzzle brake

  • Extremely effective five-chamber muzzle brake
  • Exhaust duct preventing the side of the weapon from bouncing
  • Five-chamber system eliminating kickback and vertical rebound
  • Possibility of installing a thermal shield (lent)
  • Locking nuts for easy installation
  • Precise workshop processing on CNC machines
  • Easy to install and use

Technical parameters

  • Length 80mm (3,149in)
  • Diameter 26mm (1,023in)
  • Thread M18x1 or 5 / 8x24UNF
  • Weight 155g (0.341lb)
  • Material STEEL

Suitable for calibers

  • up to 6mm (cal. 243)
  • up to 7mm (cal. 265)
  • up to 7.90mm (cal. 308)
  • up to 9mm (cal. 338)

Supplied colors

  • Black (BLACK - CERAKOTE H-190)
  • Sand (COYOTE - CERAKOTE H-267)
  • Green (KHAKI - CERAKOTE H-232)
  • Pink (PINK - CERAKOTE H-224)
  • Individual from the CERAKOTE offer, according to your requirements

Suitable for calibers

  • up to 6mm (cal. 243)
  • up to 7mm (cal. 265)
  • up to 7,90mm (cal. 308)
  • up to 9mm (cal. 338)

Supplied colors

  • Black (CERAKOTE - BLACK H-190)
  • Sand (COYOTE - CERAKOTE H-267)
  • Khaki (KHAKI - CERAKOTE H-232)
  • Pink (PINK - CERAKOTE H-224)


 
Terug naar overzicht